top of page

SELECT YOUR SOUNDBAR

select-you-soundbar copy.png

Samsung TV 2016 Series

Step-by-Step Instructions for Best Experience

Select the User Interface below that matches your TV:

Samsung_2023_audio_01-min.jpg
Q80C (2023)
samsung-tv-2022-audio-01.jpg
Q80B (2022)
samsung-Q60A-audio-01-min.jpg
Q60A (2021)
Samsung UN55TU8000FXZA_2020_audio_01.png
UN55 (2020)
samsung-tv_audio_3.jpg
Q60 (2019)
Q7F (2017)
2016 Series
2015 Series

Click here to browse TV Settings from 2024 and beyond.

settings

STEP-BY-STEP GUIDE:​

warning-2.png

NOTE

Connect TV's HDMI ARC to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >

 

If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >

​

Play a video with 5.1 surround audio (e.g Stranger Things on Netflix or Amazon Prime Video) before setting up as there will be no audio selection available.

warning-2.png

NOTE

Connect TV's HDMI ARC to soundbar HDMI 1 eARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >

 

If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >

​

Play a video with 5.1 surround audio (e.g Stranger Things on Netflix or Amazon Prime Video) before setting up as there will be no audio selection available.

1. AUDIO OUTPUT

Settings >

Sound >

Speakers Settings >

select Receiver (HDMI)

TV Sound Output >

samsung_tv2_audio_3.jpg

2. AUDIO FORMAT

Settings >

Sound >

Additional Settings >

Audio Format >

select Dolby Digital or PCM (whichever available)

samsung_tv2_audio_5.jpg
warning-2.png

Press INFO button on soundbar remote control to verify audio format received on soundbar (Dolby/DTS audio for best audio)

warning-2.png

Option 1: Switch the soundbar to TVHDMI 1 input and observe the LED light status at the front of soundbar when playing content (3 LED = Dolby Digital; 2 LED = DTS)

​

Option 2: Switch the soundbar to OPTICAL input and observe the LED light status at the front of soundbar when playing content (3 LED = Dolby Digital; 2 LED = DTS)

select-you-soundbar copy.png
bottom of page