Step-By-Step Procedure:

​

Note: Refresh the soundbar to re-establish HDMI connection with TV after scheduled auto-updates.

1. Unplug the AC power cord of soundbar from the wall outlet

2. Wait for 2 mins to fully discharge the soundbar

3. Plug the AC power cord back into the wall outlet 

​

​

Setting HDMI CEC

1. Settings > System > Select Anynet++ (HDMI CEC) > Turn On

2. Search for Devices > TV starts search

3. Press OK once AUDIO SYSTEM/RECEIVER (Nakamichi) is found.

The soundbar will now be connected to the TV.​

Step-By-Step Procedure:

​

Note: Refresh the soundbar to re-establish HDMI connection with TV after scheduled auto-updates.

1. Unplug the AC power cord of soundbar from the wall outlet

2. Wait for 2 mins to fully discharge the soundbar

3. Plug the AC power cord back into the wall outlet 

​

​

Setting HDMI CEC

​

1. Settings > System > Select Expert Settings

2. Set Anynet++ (HDMI CEC) to On

3. Go to Settings > Sound > Select Receiver(HDMI) (To verify the audio outputdevice)

Setup Tutorial Video:

Step-By-Step Procedure:

​

Note: Refresh the soundbar to re-establish HDMI connection with TV after scheduled auto-updates.

1. Unplug the AC power cord of soundbar from the wall outlet

2. Wait for 2 mins to fully discharge the soundbar

3. Plug the AC power cord back into the wall outlet 

​

​

Setting HDMI CEC

1. Go to Settings

2. Select General

3. Select External Device Manager

4. Set Anynet++ (HDMI CEC) to On