SELECT YOUR SOUNDBAR

arrow&v

Samsung TV 2015 Series

Step-by-Step Instructions for Best Experience

Select the User Interface below that matches your TV:

samsung-tv_audio_3.jpg
 

STEP-BY-STEP GUIDE:

NOTE

Option 1: Connect TV's HDMI ARC to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio

Option 2: Connect TV's Optical Out to soundbar Optical In with a Optical cable

 

If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >

Play a video with 5.1 surround audio (e.g Stranger Things on Netflix or Amazon Prime Video) before setting up

NOTE

Connect TV's HDMI ARC to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >

 

If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >

Play a video with 5.1 surround audio (e.g Stranger Things on Netflix or Amazon Prime Video) before setting up

1. AUDIO OUTPUT

Settings >

Sound >

Select Speaker >

select Receiver (HDMI)

select Receiver (HDMI) (option 1) or Optical (option 2)

2. AUDIO FORMAT

Settings >

Sound >

Expert Settings >

select Bitstream

HDMI Input Audio Format >

3. AUDIO CODEC

Settings > Sound > Expert settings > select Dolby Digital or DTS NEO 2:5 (whichever available)

warning-2.png

Option 1: Switch the soundbar to TVHDMI 1 input and observe the LED light status at the front of soundbar when playing content (3 LED = Dolby Digital; 2 LED = DTS)

Option 2: Switch the soundbar to OPTICAL input and observe the LED light status at the front of soundbar when playing content (3 LED = Dolby Digital; 2 LED = DTS)

warning-2.png

Press INFO button on soundbar remote control to verify audio format received on soundbar (Dolby/DTS audio for best audio)

Customer Care:

support@nakamichi-usa.com

(415) 805 6913

(Weekdays 10am - 7pm PST; Weekends 10am - 5pm PST)

© 2019 NAKAMICHI LLC. ALL RIGHTS RESERVED.