SELECT YOUR SOUNDBAR
HOME > AUDIO SETTINGS >
Samsung TV 2020 Series
Step-by-Step Instructions for Best Experience
(Reference Model: Samsung UN55TU8000FXZA)
Select the User Interface below that matches your TV:
NOTE
Option 1: Connect TV's HDMI ARC to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >
Option 2: Connect TV's Optical Out to soundbar Optical In with a Optical cable
If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >
Play a video with 5.1 surround audio (e.g Stranger Things on Netflix or Amazon Prime Video) before setting up
Audio Settings
HDMI CEC Settings
STEP-BY-STEP GUIDE:
NOTE
Connect TV's HDMI eARC to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >
If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >
NOTE
Connect TV's HDMI eARC to soundbar HDMI 1 eARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >
If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >
1. AUDIO SETTINGS
Click on the arrow button at the sides of the image to go forward/backward for settings. (Click on image to enlarge)
Sequence:
-
Settings > Sound > Sound Output > select Receiver (HDMI)
-
Settings > Sound > Sound Output > Expert Settings > HDMI-eARC Mode > Auto
-
Settings > Sound > Sound Output > Expert Settings > Digital Output Audio Format > Auto
-
Settings > Sound > Sound Output > Expert Settings > Digital Output Audio Delay > 0
1. Settings > Sound
Option 1: Switch the soundbar to TVHDMI 1 input and observe the LED light status at the front of soundbar when playing content (3 LED = Dolby Digital; 2 LED = DTS)
Option 2: Switch the soundbar to OPTICAL input and observe the LED light status at the front of soundbar when playing content (3 LED = Dolby Digital; 2 LED = DTS)
Press INFO button on soundbar remote control to verify audio format received on soundbar (Dolby/DTS audio for best audio)
