Vizio 2019 Series

Step-by-Step Instructions for Seamless Controls
(Reference Model: Vizio M50Q)

Select the User Interface below that matches your TV:

VizioM502019_hdmi_01.jpg
Picture5.png
 

STEP-BY-STEP GUIDE:

NOTE

Refresh the soundbar to re-establish HDMI connection with TV after scheduled auto-updates.

  1. Unplug the AC power cord of soundbar from the wall outlet

  2. Wait for 2 mins to fully discharge the soundbar

  3. Plug the AC power cord back into the wall outlet

NOTE

Connect TV's HDMI ARC to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >

 

If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >

1. ENABLE HDMI-CEC

Menu Button >

TV Settings >

System >

CEC >

Select Enabled

2. DEVICE DISCOVER HDMI-CEC

Menu Button >

TV Settings >

System >

CEC >

Select Device Discovery >

Show Nakamichi Connected

  1. Power cycling can solve a lot of odd problems with Vizio TVs.

  2. First disconnect the TV’s power cord from the power outlet and leave it unplugged for an hour.

  3. Then press and hold the power button on the TV or remote for 10 seconds to drain out remaining power. Plug TV back into power outlet and power it back on. 

  4. For more information, visit here

Contact our Nakamichi Ninjas!

Email: support@nakamichi-usa.com

Telephone: +1 (415) 805 6913

Weekdays 10am - 7pm PST , Saturday, Holidays 10am - 5pm PST

© 2020 NAKAMICHI USA. ALL RIGHTS RESERVED.

nakamichi-helpdesk-logo.png