Step-by-Step Instructions for Best Experience
(Reference Model: Vava Projector)
Vava
Others
Audio Settings
HDMI CEC Settings
STEP-BY-STEP GUIDE:​
NOTE
Connect Vava Projector HDMI Input to soundbar HDMI 1 eARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >
​
It is recommended to connect all your source devices to soundbar directly.
​
HDMI cable is designed to support up to 50ft and the result varies depending on the output devices. It is highly recommended to keep the HDMI cable length as short as possible to avoid unintentional signal drop outs.
​
DO NOT connect soundbar HDMI output (HDMI 1 eARC) to any HDMI MHL port on the soundbar. HDMI MHL is designed to be compatible with mobile devices.
NOTE
Connect Vava Projector HDMI Input to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >
​
It is recommended to connect all your source devices to soundbar directly.
​
HDMI cable is designed to support up to 50ft and the result varies depending on the output devices. It is highly recommended to keep the HDMI cable length as short as possible to avoid unintentional signal drop outs.
​
DO NOT connect soundbar HDMI output (HDMI 1 ARC) to any HDMI MHL port on the soundbar. HDMI MHL is designed to be compatible with mobile devices.
IMPORTANT
It has been reported that some projector's HDMI-CEC will not work properly with soundbars / audio systems as it will send a CEC mute command over. In order to prevent prevent the mute signal from going back to the soundbar’s eARC input, a HDMI CEC-Less adapter is required. Learn More >
1. AUDIO SETTINGS
Click on the arrow button at the sides of the image to go forward/backward for settings. (Click on image to enlarge)
​
Sequence:
-
Settings > Sound
-
select RAW: No processing for the source audio. Recommended for Dolby Audio and DTS sources for better performance.
-
HDMI ARC: Output the sound via the HDMI ARC port.
1. Settings
Press INFO button on soundbar remote control to verify audio format received on soundbar (Dolby/DTS audio for best audio)
Switch the soundbar to TVHDMI 1 input and observe the LED light status at the front of soundbar when playing content (3 LED = Dolby Digital; 2 LED = DTS)
