SELECT YOUR SOUNDBAR

arrow&v

Projector

Step-by-Step Instructions for Best Experience
 

STEP-BY-STEP GUIDE:

NOTE

Connect Projector's HDMI ARC to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >

 

Most of the projectors do not support HDMI ARC function. Connect all your content devices to soundbar directly.

HDMI cable is designed to support up to 50ft and the result varies depending on the output devices. It is highly recommended to keep the HDMI cable length as short as possible to avoid unintentional signal drop outs.

DO NOT connect soundbar HDMI output (HDMI 1 ARC) to any HDMI MHL port on the soundbar. HDMI MHL is designed to be compatible with mobile devices which may not work well with higher resolution devices

Verify HDR support on your projector. If your projector is not supporting HDR format, turn off HDR output on your content devices

IMPORTANT

It has been reported that some projector's HDMI-CEC will not work properly with soundbars / audio systems as it will send a CEC mute command over. In order to prevent prevent the mute signal from going back to the soundbar’s ARC input, a HDMI CEC-Less adapter is required. Learn More >

warning-2.png

Play video contents on content devices that connected to soundbar HDMI input to verify video output on your projector

Contact our Nakamichi Ninjas!

Email: support@nakamichi-usa.com

Telephone: +1 (415) 805 6913

Weekdays 10am - 7pm PST , Saturday, Holidays 10am - 5pm PST

© 2021 NAKAMICHI USA. ALL RIGHTS RESERVED.

nakamichi-helpdesk-logo.png