Shockwafe Ultra 9.2 DTS:X, Elite 7.2 DTS:X & Pro 7.1 DTS:X

  1. Power off the subwoofer

  2. Wait for 1 minute

  3. Power on the Left subwoofer by switching the power switch at the back of subwoofer to ON position

  4. Repeat Step 3 for Right subwoofer

  5. Press Pairing button on the Left subwoofer

  6. Repeat Step 5 for the Right subwoofer. The Blue LED on the back of 2 subwoofers will start blinking

  7. Power ON the soundbar

  8. Switch to USB mode, press and hold the DEMO button for 5 seconds. OR Using the remote control, (a) Switch to USB mode, (b) Toggle the MENU button to “SUB PAIR” and (c) Press ENTER. The LED display on the Soundbar will display “SUB PAIR” then “PAIR-“.

  9. Check the subwoofer connection with soundbar​​:
    Blinking Blue LED - subwoofer is in pairing mode.
    Constant Blue LED - subwoofer is paired with soundbar

  10. Once the subwoofer is connected (Constant Blue LED), press NIGHT button on remote control to  ​turn the sub on (NIGHT -> ON)

  11. Turn up the subwoofer level by pressing BASS + on the remote control

 

Shockwafe Pro 7.1

  1. Power OFF the soundbar and subwoofer

  2. Switch ON the subwoofer by flicking the power switch to ON position

  3. Press and Hold the pairing button at the back of the subwoofer for 5 seconds until the Blue LED on the back of the subwoofer starts blinking

   4. Power ON the soundbar

   5. Press and Hold the DEMO button for 5 seconds on the sound bar until all the LED indicators on the soundbar fully light up

   6. Once the subwoofer linking process is complete, the Blue LED on the back of subwoofer will light up constantly.

   7. To verify the subwoofer is turned on, press the Night button > Sub On

   8. Turn up the volume on the subwoofer

Customer Care:

support@nakamichi-usa.com

(415) 805 6913

(Weekdays 10am - 7pm PST; Weekends 10am - 5pm PST)

© 2019 NAKAMICHI LLC. ALL RIGHTS RESERVED.