Firmware / Shockwafe Pro 7.1 Firmware
Shockwafe Pro 7.1 DTS:X / ATMOS
Firmware upgrade
Version: FW35 // Last Updated: Dec 2020
Overview
Notes
Check the firmware version you are on
-
Switch soundbar to HDMI ARC input using remote. Press the INFO button a few times and the soundbar will display "FWXX"
If you do not have the latest version, please read this carefully before performing your upgrade
-
The firmware is strictly for all versions of Shockwafe Pro 7.1 Soundbar System only.
-
The firmware is downloadable on PC / Mac only.
-
Please follow the instructions stated on the Installation Guide on this page to ensure smooth upgrade.
-
It is crucial to perform a Soundbar Reset after firmware installation is completed.
Download the latest User Manual & Quick Start Guide
INSTALLATION (A Step-by-step guide)
Step 1. Preparing the USB Drive
-
Important Specs for USB Drive: USB2.0;
-
Plug an USB drive into your PC / Mac, 16GB Max;
-
Reformat the USB drive to "FAT16" or "FAT32" format. Click here for instructions to reformat drive
Recommended USB 2.0 Drives.
To purchase, click a drive below
PC / MAC
Important
-
Only drives with these specs will work: USB2.0.
-
Recommended drives: PNY Drive, SanDisk Cruzer Blade
-
-
Do not remove USB drive or turn off your Soundbar while upgrading.
-
Do not plug USB drive into the Subwoofer(s).
-
If the soundbar display is stuck on UPG or upgrade is not performing, it means your USB drive is not compatible.
-
If the soundbar is stuck permanently displaying UPG even after turning off, perform the following:
-
Power off the soundbar, plug in a proper spec'd usb drive with the firmware files, the upgrade will resume once soundbar is powered on.
-
Note: To ensure the best possible compatibility for firmware upgrade, please use one of the drives as follows or use a USB 2.0 drive of 16GB or smaller from a reputable brand (SanDisk, Kingston, PNY.)
DownloaD
By clicking Agree, you are agreeing to the Terms and Conditions. This will take you to the firmware download page.
Frequently asked questions
I am on FW33, can I directly download FW35 to update?
-
Whether you are on a firmware earlier than FW33 or on FW34, you can upgrade your soundbar to FW35. To ensure a smooth upgrade, please follow the instructions on the Installation Guide carefully.
The soundbar could not detect the USB Drive / The upgrade got stuck halfway. What should I do?
-
If the soundbar display is stuck on UPG or upgrade is not performing, it means your USB drive is not compatible. Only drives with these specs will work: USB2.0, 16GB Max.
-
Be sure that USB drive is formatted to FAT16 / FAT 32. Click here for instructions on how to format the USB drive
-
If the soundbar is stuck permanently displaying UPG even after turning off, perform the following:
-
Power off the soundbar, plug in a proper spec'd usb drive with the firmware files, the upgrade will resume once soundbar is powered on.
-
My soundbar system / rear speakers does not work after the firmware upgrade.
-
Please contact our support immediately at support@nakamichi-usa.com
How would you like to contact us?
Speak to our ninjas
(415) 805 6913
Weekdays 10am - 6:45pm PST
Saturday, Holidays 10am - 4:45pm PST
Write to us
Weekdays 10am - 6:45pm PST
Saturday, Holidays 10am - 4:45pm PST