HOME > FIRMWARE UPGRADE > SHOCKWAFE PLUS 5.2

FIRMWARE UPGRADE
FOR SHOCKWAFE PLUS 5.2 MODEL

IMPORTANT

This firmware is strictly for Plus 5.2 (2018) soundbar system only. Perform soundbar reset after the firmware installation is completed.

Please READ the following information before upgrading your soundbar to ensure a smooth firmware upgrade experience.

Use an USB drive with the following requirements:
1. USB 2.0
2. Maximum drive size 32GB
3. FAT16/FAT32 file format (see 
HERE for how to reformat an    USB drive)

Compatible USB drives we have tested:

Kingston USB Drive >

Kingston Digital DataTraveler USB Drive >

San Disk >

Transcend JetFlash >

NOTE:

1. Refer to Firmware Installation Guide for step-by-step instructions

2. This firmware upgrade is required to be done on the SOUNDBAR ONLY.

3. DO NOT UPGRADE YOUR SUBWOOFER

NOTE:

1. Refer to Firmware Installation Guide for step-by-step instructions

2. This firmware upgrade is required to be done on the SOUNDBAR ONLY.

3. DO NOT UPGRADE YOUR SUBWOOFER

4. The new firmware will not change the firmware version number on the soundbar

5. To verify the new firmware, the volume incremental is now in 2 steps 

Change Log:

Firmware 1.0C (07-06-2018)

Resolves intermittent mute audio issues with PCM content playback

Contact our Nakamichi Ninjas!

Email: support@nakamichi-usa.com

Telephone: +1 (415) 805 6913

Weekdays 10am - 7pm PST , Saturday, Holidays 10am - 5pm PST

© 2020 NAKAMICHI USA. ALL RIGHTS RESERVED.

nakamichi-helpdesk-logo.png